Revit Platform

Subject:    Revit - Printing A3 Reduced Scale Prints

Sent: September 2007

Attachments:  <none>

Hi,
When I print out my work to A3 format, the scale is not correct.
I think it used to be.
Is this a Revit setting or a printer setting?
Regards
WB

Response:

Hi,
Not exactly sure what you mean here.
I suspect you are doing a reduced paper size print from say an original A1 down onto an A3 sheet size.
If so DON’t use Fit to paper, instead use the Scale: 50% option.
If the Revit Titleblock size is an A2 then the Scale: needs to be 67%.
Usually best to set to place ‘Centre of page’.

Regards,
rich